manualshive.com logo in svg

Huawei AP8130DN, Product Description, Page: 15 / 33

Share
Download
Huawei AP8130DN Product Description Download Page 15

AP8130DN 
Product Description 

2 Hardware Structure 

 

Issue 02 (2014-12-05) 

Huawei Proprietary and Confidential                                     

Copyright © Huawei Technologies Co., Ltd. 

12 

 

Type 

Color 

Status 

Description 

Running 
status 

Green 

Blinking 
once every 
2s (0.5 
Hz) 

 

The system is running properly, the Ethernet 
connection is normal, and STAs are associated 
with the AP. 

 

The system enters the Uboot CLI. 

Blinking 
once every 
5s (0.2 
Hz) 

The system is running properly, the Ethernet 
connection is normal, and no STA is associated 
with the AP. The system is in low power 
consumption state. 

Alarm 

Green 

Blinking 
once every 
0.25s (4 
Hz) 

 

The software is being upgraded. 

 

After the software is uploaded and started, the 
AP working in Fit AP mode requests to go 
online on the AC and maintains this state until it 
goes online successfully on the AC (before the 
CAPWAP link is established). 

 

The AP working in Fit AP mode fails to go 
online on the AC (the CAPWAP link 
disconnects). 

Fault 

Red 

Steady on 

A fault that affects services has occurred, such as a 
DRAM detection failure or system software 
loading failure. The fault cannot be automatically 
rectified and must be rectified manually. 

 

Table 2-2

 

Descriptions about the Link indicator 

Type 

Color 

Status 

Description 

LINK 

Green 

Steady on 

The system is running properly, the Ethernet 
connection is normal, and no data is being 
transmitted. 

ACT 

Green 

Blinking 

The system is running properly, the Ethernet 
connection is normal, and the AP is transmitting 
data. The indicator blinks more quickly when more 
data is being transmitted. 

 

Table 2-3

 

Description about the Wireless indicator (Traffic volume indicator) 

Color 

Status 

Description 

Yellow/green 

Off 

Radios are disabled, and no STA is 
connected to the AP. 

Yellow/green 

Steady on 

The AP has STAs connected to the 2.4 GHz 
radio or 5 GHz radio, but no data is being 
transmitted. 

Summary of Contents for AP8130DN


































Reviews:

No comments