manualshive.com logo in svg

Huawei AP6050DN, Product Description

Share
Download
Huawei AP6050DN Product Description Download Page 19

AP6050DN&AP6150DN 
Product Description 

2 Hardware Structure 

 

Issue 01 (2016-05-31) 

Huawei Proprietary and Confidential                                     

Copyright © Huawei Technologies Co., Ltd. 

14 

 

 

As shown in Figure 2-4, each port can be described as follows: 

1.

 

Default button: restores factory settings if you hold down the button more than 3 
seconds. 

2.

 

USB port: connects to a USB flash drive to extend the storage space of the AP, and 
provides a maximum of 2.5 W power. 

3.

 

Console port: connects to the maintenance terminal for AP configuration and 
management. 

4.

 

Ground screw: connects the AP to a ground cable. 

5.

 

GE1: 10/100/1000M port used to connect to the wired Ethernet. 

6.

 

GE0/PoE: 10/100/1000M port used to connect to the wired Ethernet. The port can 
connect to a PoE power supply to provide power for APs. 

7.

 

Input port for 12 V DC power supply. 

8.

 

Lock port: protects the AP against theft. 

9.

 

Antenna port: connects to an external antenna for transmitting and receiving service 
signals. 

LED Indicators 

 

Indicator colors may vary slightly at different temperature. 

Type 

Color 

Status 

Description 

Default status after 
power-on 

Green 

Steady on 

The AP is just 
powered on and the 
software is not 
started yet. 

Software startup 
status 

Green 

Steady on after 
blinking once 

After the system is 
reset and starts 
uploading the 
software, the 
indicator blinks 
green once. Until the 
software is uploaded 
and started, the 
indicator remains 
steady green. 

Running status 

Green 

Blinking once every 
2s (0.5 Hz) 

 

The system is 
running properly, 
the Ethernet 
connection is 
normal, and 
STAs are 
associated with 
the AP. 

 

The system 
enters the Uboot 
CLI. 

Summary of Contents for AP6050DN






































Reviews:

No comments

Brands by name

Popular brands

Load more brands