Huawei Airbridge DBS3900 Installation Manual Download Page 113

Page: 113 / 303

DBS3900 LampSite
Installation Guide

7 Installing a pRRU3901

Issue 08 (2016-05-30)

Huawei Proprietary and Confidential

106

Figure 7-42

Installing jumpers between the pRRU3901 and external antennas

----End

Follow-up Procedure

Route the cable, and then use a cable tie to bind the cable. For details, see 7.5.1
Requirements for Cable Layout.

Label the installed cable. For details, see section 15.4 Attaching an L-Shaped Label.

7.6 Checking the pRRU3901 Hardware Installation

pRRU3901 hardware installation checking includes hardware and cable installation checking.

Table 7-9 lists the hardware installation checking items.

Table 7-9

Hardware installation checking list

No.

Item

Ensure that the pRRU3901 is not grouned.

The position for each device conforms to the engineering design and meets the
space requirement.

Ensure that the pRRU3901 is properly installed.

The surface of the pRRU3901 is neat and clean. The external paint is intact.
The labels, tags, and nameplates are correct, legible, and complete.

Table 7-10 lists the check items of the signal cable connection.

Table 7-10

Checklist for the signal cable connection

No.

Item

Summary of Contents for Airbridge DBS3900
















































































































































































































































































































Search results

Summary of Contents for Airbridge DBS3900

Reviews:

Related manuals for Airbridge DBS3900

Brands by name

Popular brands

Huawei Airbridge DBS3900, Installation Manual

Search results

Summary of Contents for Airbridge DBS3900

Reviews:

Related manuals for Airbridge DBS3900

Brands by name

Popular brands