Huawei Airbridge BTS3606A Technical Manual Download Page 41

Page: 41 / 59

Technical Manual
Airbridge BTS3606A CDMA Base Station

System Description

Chapter 6 Operation and Maintenance System

6-1

Chapter 6 Operation and Maintenance System

The operation and maintenance system covers the local operation and maintenance

system, and the M2000 Mobile Integrated Network Management System (hereafter

briefed as M2000 system).

This chapter introduces how to perform the local and remote maintenance through the

local operation and maintenance system.

This chapter also briefs the basic structure and functions of the M2000 system. The

details information of the M2000 system is available in the related manuals of M2000.

6.1 Structure of the Operation and Maintenance System

6.1.1 Local Operation and Maintenance System

Figure 6-1 shows the structure of the BSS/AN local operation and maintenance

system.

PSTN

Internet

IPoE

IPoA

Router

Modem

IPoE

Router

Modem

IPoE

BSC

BTS

IPOA : IP over ATM

IPOE: IP over Ethernet

Figure 6-1

BSS/AN local operation and maintenance system

I. Far-end maintenance

The Local Maintenance Terminal (LMT) connects to the BSC BAM to realize the far-end

maintenance on BTS.

The local operation and maintenance system of the BSS is designed in Client/Server

(C/S) structure, where LMT is a Client and BAM a Server. The operation procedure is

as follows:

1) The user inputs operation commands through the LMT.

2) The BAM processes commands from LMTs.

Summary of Contents for Airbridge BTS3606A




























































Search results

Summary of Contents for Airbridge BTS3606A

Reviews:

Related manuals for Airbridge BTS3606A

Brands by name

Popular brands

Huawei Airbridge BTS3606A, Technical Manual

Search results

Summary of Contents for Airbridge BTS3606A

Reviews:

Related manuals for Airbridge BTS3606A

Brands by name

Popular brands