Huawei 5288 V3 V100R003 User Manual Download Page 284

Page: 284 / 297

Step 4

Run the

badblocks -swft 0

drive letter

command to erase data from the hard disk.

For example, to erase data from HD1, whose drive letter is

/dev/sdb

, run the following

command:

badblocks -swft 0 /dev/sdb

Figure 9-36

Erasing data

NOTE

The drive letters vary depending on the type of the storage media. Confirm the drive letter of the
storage medium before erasing data from it.

The data erase operation takes time.

If the

badblocks -swft 0

command fails, contact Huawei technical support.

Step 5

Remove the hard disk.

For details, see

7.5 Removing a Hard Disk

NOTE

After data is erased, do not restart or remove and reinstall the server. Otherwise, data will be reloaded to
the hard disks when the server restarts.

----End

Removing Data from a microSD Card by Using Toolkit

Step 1

Download and decompress the Toolkit package

FusionServer Tools-Toolkit-Vxxx.zip

, and

obtain the image

FusionServer Tools-Toolkit-Vxxx.iso

Step 2

Configure

Boot Option

, set the boot medium to

DVD-

ROM

, and click

Save

The

Boot Option

page is displayed.

Step 3

Open the Remote Virtual Console.

For details, see

9.7 Logging In to the Remote Virtual Console

Step 4

Click

on the toolbar.

The screen shown in

Figure 9-37

is displayed.

Figure 9-37

Virtual DVD-ROM drive

Step 5

Select

Image File

and click

Browse

The

Open

dialog box is displayed.

5288 V3 Server
User Guide

9 Common Operations

Issue 26 (2018-11-19)

274

Summary of Contents for 5288 V3 V100R003










































































































































































































































































































Search results

Summary of Contents for 5288 V3 V100R003

Reviews:

Brands by name

Popular brands

Huawei 5288 V3 V100R003, User Manual

Search results

Summary of Contents for 5288 V3 V100R003

Reviews:

Brands by name

Popular brands