manualshive.com logo in svg

Huawei 3900 Series, Commissioning Manual

Share
Download
Huawei 3900 Series Commissioning Manual Download Page 57

Parameter Field

Description

GBTS Name

GBTS name
The value of this parameter is mandatory to be exported, and the
parameter cannot be edited in the 

MBTS Auto Deployment

 window.

GBTS Type

The type of the GBTS to be commissioned.
The value of this parameter is mandatory to be exported, and the
parameter cannot be edited in the 

MBTS Auto Deployment

 window.

GBTS Software
Version

The target version of the GBTS (If the target version is configured, the
value is mandatory to be exported).
The value of this parameter is optional to be exported, and the
parameter cannot be edited in the 

MBTS Auto Deployment

 window.

GBTS Hot Patch
Version

The hot patch version of the target GBTS (If the target version is
configured, the value is mandatory to be exported).
The value of this parameter is optional to be exported, and the
parameter cannot be edited in the 

MBTS Auto Deployment

 window.

Contact

Contact of the frontline MBTS engineers for the engineers who
perform remote commissioning to view conveniently.
The value of this parameter is optional to be exported, and the
parameter cannot be edited in the 

NodeB Auto Deployment

 window.

 

NOTE

When the GBTS side is being commissioned, the 

Auto Deployment Type

 should be 

GBTS

.

When the NodeB side is being commissioned, the

Auto Deployment Type

 should be 

NodeB

.

When the MBTS is being commissioned, the 

Auto Deployment Type

 should be 

MBTS

.

4.9.3 Parameters for MBTS Service Verification Performance
Counters

This section describes the parameters of the performance counters that are monitored at the
service verification stage during MBTS commissioning.

Table 4-10

 describes the service performance counters of monitored GBTSs and NodeBs at the

service verification stage during MBTS commissioning.

Table 4-10

 Parameters of performance counters

NE Type

Parameter

Description

GBTS

SDCCH
Verification

Refers to the number of times the SDCCH is occupied
successfully. If the value of this counter is not zero, it
indicates that this counter passes the service
verification.

3900 Series Multi-Mode Base Station
Commissioning Guide

4 Commissioning the MBTS in GU Mode on the M2000

Issue 02 (2010-07-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

4-31

Summary of Contents for 3900 Series





































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands