Installation and Instruction
2
11
(1) [Basic setting] Logger parameters setting
Name: a logger can be named according to the actual situation. The name of each
instrument cannot be duplicated.
Serial number: enter the 10-digit serial number according to the sticker attached to
the logger.
Instrument type: set to "Wireless instrument".
Sampling interval (seconds): The refresh interval of the instrument data can be set
according to the actual need.
Number of sensors: select single channel to display only 1 channel (one channel
for temperature logger), select dual channel to display 2 channels (two channels
for temperature and humidity logger).
(2)[Sensor 1]
Upper threshold: the upper threshold can be set. When measurement exceeds the set
value, the monitored value will be displayed in red. Please also set the alarm method to
send the alarm information according to the actual need.
Lower threshold: the lower threshold can be set. When measurement exceeds the set
value, the monitored value will displayed in red. Please also set the alarm method to
send the alarm information according to the actual need.
Type: Temperature / Humidity (Please choose according to the type of the logger.)
(3) [Sensor 2]
Upper / lower thresholds: The upper and lower thresholds can be set according to the
actual need. When the set value is exceeded, the monitored value will be displayed in
red, and the alarm information will be sent according to the set alarm method.
Type: Temperature / Humidity
Sound and light alarm: It can be selected to close working hours only or always open.
Add: first select one of the logger in the dialog, display the properties, enter the new
name and serial number, set other parameters according to the actual need, and then
click Add.
Modify: first select one of the logger in the dialog, set the relevant parameters according
to the actual need, click the modify button to confirm, and then click OK after the
successful message.
Delete button function: first select one of the logger in the dialog box, click the delete
button to confirm the deletion, and then click OK after the successful message .
Exit button: Click the exit button to exit the device management dialog.
