--------P.5--------
1.6 Instructions for buttons function
Buttons
Introduction for buttons operation
ON/OFF : in the status of off ,click to turn on the instrument,and in the status of on,click
to turn off the instrument.
℃
/
℉
/K switching button: click it to switch the
℃
/
℉
/K temperature.
Button for setup mode:click
to set calibration for temperature deviation ,click
again to set calibration for temperature deviation,finally click to save the settings and exit
the current mode.
Under setup mode,it has the setting functions as follows:
1
）
calibration for temperature deviation: click up
down
to change the
values,when click up
once,it indicates the temperature will decrease 0.1, when
click down
once,it indicates the temperature will increase 0.1.
2
）
calibration for humidity deviation: click
again
and then click up
down
to change the values,when click up
once,it indicates the humidity will
decrease 0.1, when click down
once,it indicates the humidity will increase 0.1.
Click again
to save the settings and exit the current mode.
3
）
SETUP DEL MEM: click
again ,it will show “DEL DATA XX”in the left corner
of LCD,click up
,it will show
“DEL DATA 00”,it indicates to delete the log
data,click down
,it will show“DEL DATA XX”,it indicates don't delete the log
data.Click again
to save the settings and exit the current mode.
Switching button for air temperature/backlight/temperature for DEWP/temperature for
WBT:
（
1
）
The backlight is closed during normal air temperature status.
（
2
）
Click to open the backlight, after 15 seconds the backlight will close
automatically.
（
3
）
Click again to show DEWP, it shows the measurement temperature value for
DEWP.
（
4
）
Click again to show WBT,it shows the measurement temperature value for WBT.
（
5
）
Finally click to switch to the normal status for air temperature.
