8
2.3 Setting the logger’s properties to start a new measurement.
1.
Connect the data logger to the computer.
1
2.
Running Logpro software on the PC.
3.
From the toolbar select Connect.
2
4.
Read the logger’s properties.
5.
Set the properties.
6.
Sync the properties & time. (The PC time will be synchronized to the logger as well.)
7.
From the toolbar select Disconnect
8.
Unplug the logger from the Computer, and then the logger is in Standby mode
3
.
9.
Press OK button on the logger, turn on the Data Logger and start recording.
1
The windows operating system cannot handle USB devices being unplugged and plugged back too fast. When
unplugging the logger, wait for about 5 seconds before plugging it in again. If you unplug and plug back a device too
quickly, the computer may stop recognizing any USB devices on that port. If this happens you will have to restart the
computer. This is a windows USB problem and is not related to Logpro.
2
If more than one logger is connected to your computer at the same time, the program will ask you to choose COM
port manually.
3
The logger has three modes: 1.LOG: In the mode, the logger samples and records data timely. 2.Standby: In the
mode, the logger stops to sample and record, and the LCD display is OFF. 3.OFF: In the mode, the logger stops to
sample and record, and the LCD display is off. Logpro cannot connect to the logger also.
6
5
4
7
3
