Option B：
Install the Grommet Base
2.Install the Grommet Base Plate(m) to the
Pole(a) with 3 pcs of M5x14 Bolts(g). Tighten
the bolts with the Allen Key(o). See Figure 5.
3.Position the Pole(a) on the mounting
surface. Install the Spring Washer(l) and M10
Washer(k) to M10 Bolt(i). Insert the bolt(i) into
the Support Plate(j) and the desk hole. Fasten
the M10 bolt(i) with the provided Wrench(p).
See Figure 6.
