Beijing Huahuan Electronics Co., Ltd
Figure 6-7 PTP settings
Select an appropriate profile for the PTP operation. Default is the IEEE
1588-2008 default profile. If, for example, the device is used as a T-GM in a
mobile backhaul network, the selected profile should be G.8275.
IEEE 1588-2008 specifies a range of parameters that can be set within a
predefined value sets. Each profile defined by a specific industry standard will
specify or restrict some of the parameters. When a particular profile is selected,
parameters not allowed to be modified will become gray in the interface. Other
parameters may still be changed, please check local policy for those values. Click
Apply button to apply the changes.
6.1.7.
1PPS+ToD Setting
Click the “1PPS+ToD” on the navigation tab, enter 1PPS+ToD setting page.
This page is used to set two parameters: 1PPS cable delay compensation, and ToD
format selection.
HX.PTP-GM02 IEEE-1588 Grandmaster Clock V1.0
29
Summary of Contents for HX.PTP-GM02
Page 1: ...HX PTP GM02 Suction window mount GNSS based Indoor PTP Grandmaster...
Page 8: ......
Page 10: ......
