4
Be
sure
to
use
the
provided
or
specified
parts
for
the
installation
work.
The
use
of
defective
parts
could
cause
an
injury
due
to
possible
fire,
electric
shocks,
the
unit
falling
etc.
Perform
the
installation
securely
and
please
refer
to
the
installation
instructions.
Incorrect
installation
could
cause
an
injury
due
to
possible
fire,
electric
shocks,
the
unit
falling,
leakage
of
water
etc.
Perform
electrical
work
according
to
the
installation
manual
and
be
sure
to
use
a
dedicated
section,
fused
with
16A.
If
the
capacity
of
the
power
circuit
is
insufficient
or
there
is
an
incomplete
electrical
circuit,
it
could
result
in
a
fire
or
an
electric
shock.
The
unit
must
always
have
an
earthed
connection.
If
the
power
supply
is
not
earthed,
you
may
not
connect
the
unit.
Never
use
an
extension
cable
to
connect
the
unit
to
the
electric
power
supply.
If
there
is
no
suitable,
earthed
wall
socket
available,
have
one
installed
by
a
recognized
electrician.
Do
not
move/repair
the
unit
yourself.
If
the
supply
cord
is
damaged,
it
must
be
replaced
by
the
manufacturer
or
its
service
agent
or
a
similarly
qualified
person
in
order
to
avoid
a
hazard.
Improper
movement
or
repair
on
the
unit
could
lead
to
water
leakage,
electrical
shock,
injury
or
fire.
The
unit
is
no
intended
for
use
by
children.
This
appliance
is
not
intended
for
use
by
persons
(including
children)
with
reduced
physical,
sensory
or
mental
capabilities,
or
lack
of
experience
and
knowledge,
unless
they
have
been
given
supervision
or
instruction
concerning
use
of
the
appliance
by
a
person
responsible
for
their
safety.
Children
should
be
supervised
to
ensure
that
they
do
not
play
with
the
appliance.
Do
not
tear
off
the
labels
on
the
unit.
The
labels
are
for
the
purpose
of
warning
or
reminding,
keeping
them
can
ensure
your
safe
operations.
THE APPLIANCE SHALL BE INSTALLED IN ACCORDANCE WITH NATIONAL WIRING REGULATIONS.
See technical specification table for ambient temperature range and water temperature range. The
water pressure range for the appliance is 0.15-0.7MPa.
- The water may drip from the discharge pipe of the one-way safety valve and that this pipe must be
left open to the atmosphere.
- The one-way safety valve is to be operated regularly to remove lime deposits and to verify that it
is not blocked. Please beware of burn, because of the high temperature of water.
