background image

1.“Image Overlapping” Submenu

1.1. Description of Image Overlapping

Introduction to the Menu

 

Press the left of “      /MENU” key and the menu bar appears. They are 
“Image overlapping”, “Image”, “Color palette”, “Emissivity” and “Setting” 
submenus.

Image overlapping makes it easier for users to understand the infrared 
images by using aligned visible images and infrared images. The use 
of image overlapping can capture the visible image of every infrared 
image so as to display the temperature distribution in the target region 
correctly and share with other people more effectively.

1.2. Application of Image Overlapping

Press the “    / MENU” button to enter the main menu, and select “       ” 
(Image registration) in the main menu.
Press the “ SELECT/ENTER ” button to enter the image overlap 
adjustment mode.Press the navigation keys (up, down, left and right 
buttons) to perform the visible image shift operation.
Press the “SELECT/ENTER” button to exit the image blending mode 
(Note: If there is no operation for more than 6 seconds, the image 
blending mode will be automatically exited).

The function to hide highest/lowest temperature column 
at the screen bottom

under the operation after normal start up, press “       ” key and the 
screen bottom will display highest/lowest temperature column. 
Press “        ” can also hide it. 

Image output

The saved images through capture may be checked and output 
by connecting with a computer through Micro USB.

Read images

Open the USB protective cover as shown in        . Use USB line to 
connect the USB port and then computer to read the images or 
save it into computers.images or save it into computers.

The supported operating system through verification includes: 
winxp, win7, win 8, win10, Apple system.

It is suggested to use the attached USB line or USB line with 
higher quality.

Note:
When connecting with a computer, pull off the data line after 
selecting “pop out device safely” to avoid causing file system 
damage and other problems. If “unable to save” and other 
problems occur, you may find the hard disc in the computer and 
fix it.

 2

www.xintest.com.cn

19

www.xintest.com.cn

20

Summary of Contents for HT-A8





















Reviews: