１
１１ ｗｗｗ．ｘｉｎｔｅｓｔ．ｃｏｍ．ｃｎ
ｗｗｗ．ｈｙｔｅｃｈｃｎ．ｃｏｍ．ｃｎ １２
After completion of installation, click “close” and the software
is installed.
Software application
1.Connect/disconnect
We use data transmission line to connect the computer and
the instrument. Click connection. Appearance with
the following prompt indicates successful connection.
Click to disconnect.
2. Adjust the clock
Is it troublesome to set the time on the instrument? After
connecting with the computer, we can carry out adjustment
only by clicking “Set Time”. It is synchronous with the
computer as shown in the figure below:
