P. 7
P. 8
BATTERY INSTALLATION & REPLACEMENT
●
Loosen the screw by a screwdriver to open the battery compartment.
●
Insert / replace the new batteries in the correct direction indicated inside the battery compartment.
●
Close the compartment and screw shut securely.
BATTERY SAFETY PRECAUTION
●
Non-rechargeable batteries are not to be recharged.
●
Rechargeable batteries are to be removed from the toy before being charged.
●
Rechargeable batteries are only to be charged under adult supervision.
●
Different types of batteries or new and used batteries are not to be mixed.
●
Only batteries of the same or equivalent type as recommended are to be used.
●
Batteries are to be inserted with the correct polarity. (+ and -)
●
Exhausted batteries are to be removed from the toy.
●
The supply terminals are not to be short-circuited.
●
Do not dispose of batteries in fire; batteries may leak or explode.
●
Batteries should be replaced by an adult.
●
Do not mix old and new batteries .
●
Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries.
DISPOSAL AND RECYCLING
Electrical product waste should not be discarded with household waste. Please actively support us in conserving
resources and protecting the environment by returning the non-working electrical products to an appropriate
disposable/ recycling centre (if available).
Please retain this instruction for reference.
WARNING!
CHARGING YOUR TRIKE
• The
PEDAL SWITCH
must not be pressed when charging.
• This product has
CHARGING PROTECTION
: When charging, all the functions will be cut off!
1. Unscrew and open the seat. Connect battery with
RED
wire. Then screw the seat back in place.
3
2
ASSEMBLY STEPS
Step 8
●
Insert 2 x AA batteries into Back Rest & Light Pole 7 . Insert Back Rest & Light Pole 7 into Bike Body to fix it.
Step 9
●
Insert Rear View Mirrors 14 into the handles.
2. Plug into the jack. Connector jack is located at the back of the trike body.
3. Plug in the adaptor pin into socket to start charging.
1
