HTDZ HT-6800 User Manual Download Page 5

Conference set HT‐6800/HT‐9100 User manual                     

                    

 

 

 

Rear panel : 

 

7.  AUX IN INPUT 

Aux level type. Connect on this input a device with level line such as a cd player, a dvd player, a mixer,… This device will be diffused on 
the speakers of all the micro connected to the system. 

8. LINE 

OUTPUT 

This socket is used to connect an external sound system (power amplifier or 100v power amplifier). The conference is reproduced on a 
system more powerfull  

9. REC 

OUTPUT 

This output is used to record the conference. Connect on it a recording device as cd recorder or tape recorder 

10. MASTER OUTPUT 

This socket is used to connect an external sound system (power amplifier or 100v power amplifier). The conference is reproduced on a 
system more powerfull 

 

 

11. VIDEO DVD INPUTS 

This system allows the display of video devices on the built-in touchsreen. Video can be movies from DVD player or video from cameras. 
Connect on these inputs devices as DVD player, video ouput from computer,...  
Device (DVD 1 or 2 inputs ) is selected directly from touchscreen display of main unit ( A = DVD 1, B = DVD 2 ). 

12. MIC CONNECTORS 

Use this connectors to connect all the mic. If you have more than 4 mic, you must to use connection box HT-D9100 (in option). You can 
connect up to 32 mic 
Note: Video & sound of the mic are in the same cable. 

13. LINK OUTPUT 

If you have more than 32 mic, use this connector to connect an additional power supply.  

14. DATA CONNECTOR 

Connect to this socket a video processor if you to control more than 4 camera 

 

 
 

15. POWER SOCKET 

Connect on this socket the power supply cable ( 220V ) 
The fuse is used to protect the main unit. If the fuse use is defect replace it by a fuse with same size and same value 

16.  CAMERA CONTROLE CONNECTOR 

If you use dome in place of camera you can control pan and tilt move directly from software. Connect this socket to the control connector of 
domes..  
Note : To know connections, read the user manual of the dome. 

 

 
 
 
 
 
 

XLR socket 

1- GND 
2- + 
3- - 

RS-485 

1- RS-485A+ 
2- GND 
3- RS-485B- 

RJ-45e 

1- GND 
2- GND 
3- RS-485A+ 
4- RS-485B- 

 
 

5- NC 
6- NC 
7- GND 
8- GND 

Summary of Contents for HT-6800




























Reviews: