6/30/2008 2:47:10 PM
Doc. No.
DOC-00034195 REV.
Issued Date
2007/9/27
.
Revised Date
2008/4/21
A07
Doc. Title
Nike Service Manual
Page
28 of 89
HTC CONFIDENTIAL
SM-TP002-0706
HTC Corporation
3.2 Assembling procedure
Peel off the film on inner side of Touch
Panel and check if any stain exists. Then
assemble the LCD into Housing-A.
Please apply air gun to clean the LCM & casing
surface in
CLEAN ENVIRONMENT
, and ensure
no dust or particle inside before assemble into
bezel.
[NOTE]
The glue on the bezel will be damaged after
disassemble the LCD. If you need to replace a
new LCD, please replace a new bezel too.
Assemble the Receiver into Housing-A.
Assemble the NAVI key into Housing-A.
1. Assemble the Rigid-Flex Board and
MIC rubber.
2. Fasten the screw on the Rigid-Flex
Board.
9
SCREW:72H00464-00M
(Q’TY:1)
[NOTE]
PLEASE SET UP THE TORQUE OF ELECTRICAL SCREW
DRIVER TO 0.6
±
0.1 KGF-CM
