HTC GL PS, Manual

Page: 24 / 27

Troubleshooting HTC GL PS
18 1.0
6 Troubleshooting
This chapter describes some of the faults that may occur and how to deal with them. If
the error cannot be corrected, or if errors arise other than those described here, contact
your nearest retailer. See Contact Information at the front of the manual.
Symptoms Cause/Action
Poor performance - Can be due to something blocking the airflow. Check the
hoses. (Maintenance and repairs, page
16 ).
- Could be because the pre-separator is not airtight. Check
seals, hoses, valves, faulty Longopac, (Maintenance and
repairs, page
16 ).
Dust ends up in the dust
extractor and not in the
pre-separator - The bypass valve is closed
- The pre-separator is blocked by dust
- The dust extractor's performance is impaired, see Poor
performance above. The pre-separator needs a certain air
speed to function satisfactorily
- Very light dust particles The pre-separator needs a
certain dust particle weight in order to separate them from
the airflow.
Longopac falls apart
- The dust covers are not sealing
- The dust covers are jamming
- Are there any sharp edges that the Longopac can come
into contact with?
- Is there any earlier damage to the Longopac?