2. Review the operating instruments for possible mistakes in operating procedure.
3. Inspect and test the Test Probes for a broken or intermittent connection.
4.1 BATTERY REPLACEMENT
To prevent electrical shock hazard, disconnect the test leads before removing the battery cover.
Also ensure that the test switch is not pressed.
1. Remove the cover of battery case at the rear.
2. Remove the old batteries from the meter and replace with new batteries. Replace all the same
time.
4.2 Power Adaptor
1. While Using Power Adaptor, Remove the battery for better Battery life.
2. Use Adaptor with 9V, 1.5 A Rating
CERTIFICATE OF CALIBRATION
We hereby certify that this product has been calibrated and found to be in accordance with the
applicable SPECIFICATION.
Accuracies of the standard equipment used in this calibration are
traceable to the international standards.
