HTC BH M400 Bluetooth Headset
Page 6
How to…
Making a call
Use your mobile phone in the normal way to make a call.
Transferring
audio between headset and mobile phone
During an ongoing call, long press
the
action/power key to switch conservation between your headset
and the mobile phone.
Making a call with voice dialling
Long press the Volume up key or Volume down key to activate voice dialling.
Answering a call
Short press the action/power key to answer the call
Last number
redial
Double-click the action/power key to active last number
redial
Ending a call
During a call, short press the action/power key once to hang up. If the other person hangs up first, then
the call will be
ended
automatically.
Rejecting a call
Long press
the
action/power key to reject a call
Muting a call
During a call, long press
the
Volume down key and the microphone will mute. A short
beep sounds every
4 seconds
. To cancel mute, long press
the
Volume down key.
2nd Call handling
When
the
2
nd
call is incoming, short press
the
action/power key to accept the call
Short press the action/power key to end
the
active call and switch the
held call
to active.
Double-click to switch between the two calls.
When
the
2
nd
call is incoming, long press
the
action/power key to reject 2
nd
call
Adjusting sound and volume
The headset offers 8 pre-set volume levels.
To increase the volume, short press the Volume up key
To decrease the volume, short press the Volume down key
Note:
You will hear a
short beep sound
when you set the volume to maximum or minimum
Battery
A new, or infrequently used, battery could have reduced capacity. It may need to be recharged a number of
times. When the battery needs charging, the headset beeps sound every 10 seconds. If you do not charge the
headset, it automatically turns off.
