Introduction
HTC 80 iD
2
1.1
Warning!
This symbol means
Warning!
and indicates a risk of personal injury or material
damage in the event of incorrect use of the dust extractor. When you see this
symbol, read the accompanying text extra carefully, and do nothing you are not
sure about. This is for your own and other users’ safety and to avoid damage to
the dust extractor.
Note!
This symbol means
Note!
and indicates a potential risk of material damage in
the event of incorrect use of the dust extractor. When you see this symbol, read
the accompanying text extra carefully, and do nothing you are not sure about.
This is to avoid damage to the dust extractor.
Tip!
This symbol means
Tip!
and implies the inclusion of tips and advice on
effective use of the machine or ways of reducing wear and tear to the dust
extractor. When you see this symbol you should read the accompanying text to
facilitate your work and prolong the service life of the dust extractor.
1.4
Transportation
Always ensure that the dust extractor is emptied of dust and other particles before it is
transported, lifted or hoisted.
Always make sure that the dust extractor is securely anchored to its surroundings and
that the wheel brake is in the locked position during transport to prevent it from moving
during transport. Make sure that securing straps or other equipment used for anchoring
during transport are tightened over non-moving parts, e.g. the dust extractor's chassis.
When lifting the machine, make sure you do so according to chapter Lifting the
machine, page
When the dust extractor is to be hoisted, it must be securely anchored in the notches for
secure lifting (pos 7Figure 3-2, page
), which are found on both of the chassis' long
sides. Make sure to pull with equal force, so the dust extractor doesn't twist and end up
on its side, to prevent the dust extractor from tipping.
The swivelling wheel must be pointing forwards in the direction of travel.
1.5
On delivery
The following items are included in the delivery. Contact you retailer if anything is
missing.
Summary of Contents for 80 iD
