HTC 650 E Classic
Maintenance and repairs
3.0
21
5
Maintenance and repairs
5.1
General
We recommend regular inspections of all seals.
Warning!
Disconnect the electrical supply when cleaning, carrying out maintenance,
changing tools or repairing the machine.
Warning!
Use protective equipment such as safety shoes, safety goggles, protective
gloves, mouth mask and hearing protection.
5.2
Cleaning
Warning!
Do not rinse off the machine using a high-pressure washer, as moisture can
penetrate to the electrical parts and damage the drive system.
•
Vacuum clean the control cabinet, if required.
•
Always clean the machine after use with a damp sponge or cloth.
5.3
Daily
•
Wash the machine if it is used for wet grinding.
•
Check for wear to the grinding tools – abnormal or uneven wear may indicate a
damaged grinding holder.
•
Check the tool holder and grinding holder to ensure that no damage or cracks
have arisen. Replace the parts if there is any damage.
5.4
Every week
•
Wash the machine.
•
Check the grinding holders. Remove the tools and run the machine in mid air at
the slowest speed. If the grinding holders oscillate or wobble significantly, they
are damaged.
•
Check that the upper belt is whole, by turning the large disc in one direction or
the other. If there is resistance the belt is whole, if the disc rotates freely the belt
is broken.
Summary of Contents for 650 E Classic
Page 4: ......
