ALARM
The meter features audible alarm to
give warnings when CO concentration
exceeds the limit. (See P20 in setup
for setting alarm threshold). It emits
beeps(Abt.80dB)when CO level goes
over the set value
and stops only when
the readings fall below the set value. It
beeps again when value goes over the
limit.
To escape the memory recall mode,
press key to leave and return to
normal display.
START
ESC
DATA LOGGING
The meter can automatically record
readings of CO2/CO/TEMP./RH for long
time environment monitoring. The
memory capacity is 32000 (#77597) or
24000 (#77596) points. Users can set
up sampling rate from 1 second to 4hours
59 minutes and 59 seconds (See
SETUP P40).
After sampling rate is selected, press
for 2 seconds under normal
mode to start logging. The icon
flashes to indicate the logging status
and LCD main display shows the real
time CO
2
value. Lower displays are the
real time clock.(Fig.19)
START
ESC
REC
10
MODE
RECALL
CO
Rec al l
PM
Fig.18
The time displayed in memory recall
mode is the recording time of this
memory.
Press
key to switch the display
parameter.(Fig.18)