HTB500
EN – 7
5. OPERATING INSTRUCTIONS
5.1. USING THE INSTRUMENT
CAUTION
Use the instrument in dry environments or with low humidity levels,
respecting the instructions given with the technical specifications in order
to avoid any damage.
Only the probe
’
s built-in photo camera is fully waterproof.
Do not expose the photo camera to sunlight or to external probes which
may reflect light onto it during operations.
Handle with care.
1. Insert the rechargeable battery into the relevant compartment (see Fig. 2
–
part 4),
connecting it as shown in Fig. 7
Fig. 7: Connecting the battery to the instrument
2. Insert the external probe into the instrument (see Fig. 3 - parts 1 and 4) and fasten it by
screwing in the connector (see Fig. 2
–
part 5).
3. Switch on the instrument using key
ON/OFF
. The white-light LEDs of the probe switch
on and the image of the framed item appears on the display. Move the probe to the
desired position.
4. To use the functions
Bright
,
Zoom
and
Rotate
, please refer to § 4.4
5. In case you want to use the instrument together with an external device, please
connect the TV video output (
PAL/NTSC type
) of the instrument (see Fig. 2
–
part 1)
through a standard video cable. The instrument automatically recognizes the presence
of a PAL or NTSC system.
6. Switch off the instrument using key
ON/OFF
.