HT32
EN - 13
4.3.5. Frequency measurement
CAUTION
Maximum input for AC voltage is 750V rms. Do not attempt to take any
voltage measurement exceeding such limit to avoid the risk of electrical
shock and damages to the instrument.
Fig. 6: Frequency measurement
1. Turn the selector on
Hz
.
2. Insert the test leads into the jacks, the red plug into
HzV
A
jack and the black
plug into
COM
jack (Fig. 6).
3. Connect the red and black test leads to the positive and negative poles of the circuit
under test respectively. The voltage value will be displayed with automatic detection of
the range.
4. Press
RANGE
key to activate the manual mode; the “AUTO” symbol disappears from
display. Press cyclically
RANGE
to change the position of the decimal point on the
display. To activate the Autorange function keep pressed
RANGE
for at least 1 second.
5. The message "
OL
" means that the frequency exceeds the measuring limits. In this
case disconnect the test leads from the circuit under test to avoid damaging the
instrument or endanger your own safety.
6. For minimum and maximum value measurement and HOLD function please refer to
paragraph 4.2.
