HT25N
EN - 12
5. MAINTENANCE
CAUTION
Only skilled technicians can open the instrument and replace batteries.
Before removing batteries disconnect the test leads from the input
terminals to avoid electrical shocks
Do not expose it to high temperatures or humidity or direct sunlight
Be sure to turn it off after use. If you expect not to use the instrument for a
long period remove batteries to avoid leakages of battery liquid which
could damage its inner components
5.1. BATTERY
AND
FUSES REPLACEMENT
When the low battery indication
"
BAT
"
is shown the battery is to be replaced.
Battery replacement
1. Turn off the instrument
2. Disconnect the test leads from the input terminals.
3. Remove the fixing screw from the battery cover and detach it.
4. Remove the battery replacing it with new one of the same type (see § 6.1.2) respecting
the polarity signs.
5. Replace the battery cover and screw
6. Use the appropriate battery disposal methods for your area.
Fuses replacement
1. Turn OFF the meter and disconnect the test leads from the input terminals
2. Unscrew the four fixing screws of the back holster and remove it
3. Remove the defective fuse and install a new fuse of the same size and rating (see §
6.1.2) Make sure the new fuse is centered in the fuse holder. Re-screw the back
holster
5.2. CLEANING
To clean the instrument use a soft dry cloth. Never use a wet cloth, solvents or water.
5.3. END OF LIFE
CAUTION:
this symbol indicates that equipment and its accessories shall be
subject to a separate collection and correct disposal.