HT HT2236, User Manual

Page: 23 / 88

HT2236
EN - 4
4. NOMENCLATURE
4.1. INSTRUMENT DESCRIPTION
CAPTION:
1. Removable mechanical adapter for
contact measurements
2. Extension sleeve for mechanical
adapter
3. LCD display
4.
MEM key
5. MODE key
6. /MEAS key
7. Input for external adapter
8. Battery cover
Fig. 1: Instrument description
4.2. DESCRIPTION OF FUNCTION KEYS
4.2.1. /MEAS key
Press and hold the /MEAS key to switch on the instrument and perform the
measurements in the function selected with the MODE key. The instrument switches
automatically off after about 15s
’ idleness.
4.2.2. MODE key
Press the MODE key cyclically to access and select the possible measurements
performed by the instrument, listed below:
RPM: speed measurement without contact
rPm: speed measurement with contact
HZ: rotation frequency measurements with/without contact
M / M: speed measurement with contact in Meters/Minute
I / M: speed measurement with contact in Inches/Minute
F / M: speed measurement with contact in Feet/Minute
Y / M: speed measurement with contact in Yards/Minute
Long press MODE key (>3s) and select the below measurements:
REV: counter revolutions feature
M: length measurement in Meters
In: length measurement in Inches
FT: length measurement in Feet
Yd: length measurement in Yards
Length measurement is performed with the rubber wheel terminal (see § 5.2), considering
its circumference of 10cm.