SALES
TRAINING
MANUAL
Page 28 of 30
Add washer, spring washer and then
dome nut.
Using a 5mm hex key and 13mm
ring spanner and tighten as tight as
possible.
3.
Fit cable end to
lock strut
Take care to support the Caregiver
Handle from falling while
performing this step.
The handle will be free to move
when you squeeze the Locking Strut
Lever.
Note: Make sure cable is running
down left side of Hub.
Fit the Cable Stop to the right-hand
side of the Locking Strut Lever first.
Use thumb to squeeze Locking Strut
Lever and fit the end of the Cable
Tube into the Locking Strut bracket.
