HTA102
EN - 7
4.3.9. Key
SET
Key
SET
allows for the following operations:
Activation/deactivation of the instrument
’
s auto power OFF (APO) function. Symbol
“
”
appears and disappears n/from the display (operation not possible with active HOLD
function).
Setting of system date/time, following this procedure:
1. Switch off the instrument by pressing the
ON/OFF
key.
2. Press and hold key
SET
and switch on the instrument using key
ON/OFF
. Release key
SET
with message
“
TIME
”
shown on the display. The following screen (see Fig. 3
–
left
side) indicating the current date (e.g.: 26/03/18) is shown on the display.
Fig. 3: System time setting
3. Press key
SET
to enter the programming section of
“
Minutes
”
. The screen in Fig. 3
–
Middle appears on the display.
4. Press key
LEV
to set the Minutes and key
SET
to proceed and set the Hour (see Fig. 3
–
right side).
5. Press key
LEV
to set the Hour, considering specification
“
h
–
P
”
= PM or
“
h
–
A
”
= AM
6. Press key
SET
to proceed and set the Date. The screen in Fig. 4
–
left side appears on
the display.
Fig. 4: System date setting
7. Press key
LEV
to set the Day and key
SET
to proceed (see Fig. 4
–
middle).
8. Press key
LEV
to set the Month and key
SET
to proceed (see Fig. 4
–
right side).
9. Press key
LEV
to set the Year and key
HLD
to confirm date/time and quit the
programming section.
10. Once the Year is set, by pressing key
SET
again, the following screen is shown on the
display.
