HT2234N
EN - 8
5.3.
SPEED MEASURES ON SURFACES (m/min, ft/min, yd/min)
1. Attach the mechanical adaptor to the unit
and fasten the screw.
2. Press
ON/OFF
key to turn ON the meter.
3. Press
UNIT
key to select the desired m/min, ft/min or yd/min unit .
4. Place the mechanical adaptor in contact with the surface on test, like is shown on Fig.
4:
HT2234N
START
HOLD ON/OFF
Fig. 4: speed measure on surfaces
5. Press
START
key once to enable measure.
symbol is shown at display.
6. Press
START
key again to stop measure. "
H
” symbol is shown at display.
7. The result of test and his duration is shown at display.