HST HM201-SC Installation And Maintenance Instructions Download Page 2

Compatibility Requirements

To ensure proper operation, this module should only be
connected to a compatible control panel.

Mounting and Wiring
NOTE:

 This module is intended to be wired and mounted

without rigid connections inside a standard electrical box.
All   wiring   must   conform   to   applicable   local   codes,

ordinances, and regulations.
1. Connect the loop input(+) and loop input (–) wires to
the Terminal 14 and Terminal 15.
2. Connect the loop (+) output and loop output (–) wires
to the Terminal 3 and Terminal 3.
3. Install the module in the desired mounting location

Reviews: