HSS Hire 68820 Operating & Safety Manual Download Page 2

748/01 Page 2 Black 

PMS Pro. Blue

For advice 

on the safety and suitability of this equipment

contact your local HSS Hire Shop.
This equipment should be used by an able bodied,
competent adult 

who has read and understood these

instructions. Anyone with either a temporary or
permanent disability, should seek expert advice before
using it.

Keep children, animals and bystanders away from
the work area.

Never use this equipment if you are ill,

feeling tired, or under the influence of

alcohol or drugs.

Check the equipment before use

.  If it shows signs of

damage or excessive wear, return it.

Un-coil the pressure hose then connect it to the
system

you wish to test.

Dependent on model,

release the pump handle 

by

either unhooking it or removing its pin.

Fill the pump’s reservoir

with water, 

and open the

shut off valve

. Where the pump has 2 valves close the

valve ‘V2’ (farthest from the pressure gauge) and open
the ‘V1’ valve.

Open a tap in the system to be tested in order to
allow air to escape and pump the handle.
Fill the system with water

and remove any trapped air,

then 

close the systems tap. 

Pump the system up

to the desired test pressure.

Once test pressure has been achieved, 

close the shut

off valve or valve ‘V1’.

BASIC TECHNIQUES

Hose Sense

Ensure hoses are free from kinks and sharp turns

that could impede the flow of the liquid

through the system.

GETTING STARTED

User / Operator Warning

This machine is designed to test the water

system on heating installations for leaks, using a

pressure system. The installation must only be

tested when fully charged with water, therefore

all air in the system must be removed. Only

qualified persons should use this equipment, as

these instructions only cover setting up and

using the pump. It is the hirers responsibility to

ensure the pressure used is correct for 

the installation. 

GENERAL SAFETY

Any pressure loss can now be read off the test
pressure gauge.

Where 2 gauges are fitted both must

read the same pressure, if not, stop and contact your
local HSS Hire Shop for advice.

Pump

Handle

Shut OFF

Valve

Close

Open

Pressure

Guage

Reservoir

Pressure

Hose

Ridgid

Twin Pressure

Guages

V1

V2

Open

Close

Open

Close

Pump

Handle

Reservoir

Pressure

Hose

Rothenberger

Reviews: