HSM Securio B22, Operating Instructions Manual

Page: 14 / 160

14
SECURIO B 22
12/2014
english
6 Troubleshooting
Display Problem Measure
Continu-
ous lamp
Paper
jam You have fed in too much paper.
 The cutting unit runs in reverse for a few seconds and pushes the
paper back out again.
• If necessary, press the reverse button “R” to remove the stack of paper.
• Take half the stack of paper.
• Feed the paper in portions.
Overload • The motor was overloaded. Let the shredder cool down for approx.
15 – 20 mins. before using it again.
Flashing
light
General
fault
displays • A fault has occurred while shedding paper.
Pull the paper out of the slot to clear the light barrier.
Shredded
material
container
full • Empty the shredded material container.
Note:
If you press the reverse button brie fl y before removing the container,
part of the material is pulled back into the cutting apparatus.
Container
open • Insert the shredded material container correctly in the base cabinet.