HSM SECURIO AF 350, Operating Instructions Manual

Page: 21 / 276

06/2021
SECURIO AF 350 21
english
7 Cleaning and maintenance 8 Disposal / Recycling
Electrical and electronic old
devices contain a variety of valu-
able materials, but also hazardous
substances which were required
for function and safety. Incorrect
disposal or handling can be dan-
gerous to your health and the environment.
Never dispose of old devices in the house-
hold waste. Observe the current applicable
regulations and use the collection points for
returning and recycling electric and elec-
tronic devices. Dispose of all the packaging
materials also in an environmentally-respon-
sible way.
If the paper from the paper cassette no
longer feeds into the cutting unit properly,
the intake rollers are worn and need
replacing. We can provide a replacement kit
for you to do this. Please get in touch with
our customer services.
9 Scope of delivery
• Paper shredder in carton packing
• Power supply cable
• 5 Bags for shredded material
• 1 CD bag for machines with cutting
widths of 4.5 x 30 mm
• Special cutting block oil 50 ml
• 1 USB stick
• Operating instructions
Acces so ries
(not included)
• 10 waste bags, order no. 1.661.995.150
• Special cutting block oil 250 ml
order No.: 1.235.997.403
See page 276 for our customer service
addresses.
Clean the document shredder only
with a soft cloth and a mild soap-water
solution. However, no water must enter the
equipment.
Oil the cutting unit when
cutting performance
decreases or the device
becomes noisy, or every
time you empty the waste
container. Only use HSM special lubricating
oil for the cutting unit to do this:
• Spray the special cutting unit oil through
the paper feed along the entire width of
the cutting shafts.
• Let the cutting unit run in the permanent
mode for about 10 seconds without any
paper.

Paper dust and particles are shaken o ff .
WARNING
Dangerous mains
voltage!
Improper handling of the machine can lead
to an electric shock.
Switch the shredder o ff before
relocating or cleaning it and
disconnect the mains plug.
Service work which requires the
housing covers to be removed
may only be carried out by HSM
Customer Service and service
technicians of our contractual
partners. See page 276 for our customer
service addresses.