HSM HSM1832, Instruction Manual

Page: 15 / 93

14
SECURIO B 22
01/2014
english
5 Operation
WARNING
Before switching the machine on,
make sure that you observe all
safety instructions.
Switching on the shredder
• Connect the power plug of the machine
into a properly installed socket.
• Only US-version: Set mains switch at rear
of paper shredder to „I“.
• Press the operation button.

The “Ready for operation” indicator lights
up.
Shredding paper
• When you feed paper, the light barrier
automatically starts the cutting unit.
 Two seconds after the light barrier in the
paper feed opening is free again, the cut-
ting unit is switched off automatically and
the shredder switches to standby.
Switching off the shredder
• Press the operation button.
 The “Ready for operation” indicator goes
out.
• Only US-version: Set mains switch at
rear of paper shredder to „0“.
Shredding CDs and credit cards (see
“Proper Use”)
WARNING
Depending on the type of material,
splinters could be produced when
shredding CDs. For this reason,
wear protective goggles.
Insert CD/credit card in centre of the feed
opening.