HSM HSM1831, Instruction Manual, Page: 18 / 93

01/2014
SECURIO B 22
17
english
EC Declaration of Conformity
The manufacturer HSM GmbH + Co. KG , Austraße 1 - 9, 88699 Frickingen / Germany hereby declares that the ma-
chine, referred to here as
document shredder
Securio B22
corresponds to the health and safety requirements of the following EC directives listed below due to its conception and
design of the version in which it was put into circulation by us:
Low voltage directive 2006 / 95 / EEC
EMC directive 2004 / 108 / EC
Applied standards and technical speci fi cations:
• EN 55014-1:2006 • EN 61000-4-2:1995 + A1:1998 + A2:2001
• EN 55014-2:1997 + A1:2001 + A2:2008 • EN 61000-4-4:2004
• EN 61000-3-2:2006 + A1:2009 + A2:2009 • EN 61000-4-5:2006
• EN 61000-3-3:2008 • EN 61000-4-6:2007 + Corr. Aug. 2007
• EN 62233:2008 • EN 61000-4-11:2004
• EN 60950-1:2006 + A12:2011
Frickingen, 28.10.2013
ppa. Hubert Kötzinger - Head of Environmental Engineering Product Development
9 Technical data
Cutting type Strip cut Cross cut
Cut size (mm) 5.8 3.9 3.9 x 30 1.9 x 15
Security level DIN 66399 P-2 / O-2 / T-2
E-2
P-2 / T-2 / E-2 P-4 / T-4 / E-3
F-1
P-5 / T-5 / E-4
F-2
Cutting capacity* (sheets), A4 70 g/m
2
80 g/m 2
22 - 24
17 - 19 16 - 18
13 - 15 12 - 14
9 - 11
9 - 11
7 - 9
Cutting speed 80 mm/s 90 mm/s
Weight 11 kg 12 kg
Intake width 240 mm
Power supply 230 V, 50 Hz 110 V - 120 V, 60 Hz
220 V, 60 Hz 100 V, 50 - 60 Hz
Power with max. number of sheets 440 W
Energy consumption in standby mode < 2 Wh
Operating mode Continuous operation
Ambient conditions in operation:
Temperature
Relative humidity
Height above sea-level (MSL) -10 °C to +25 °C
max. 90 %, without condensation
max. 2,000 m
Size W x D x H (mm) 375 x 310 x 600
Shredded material container volume 33 l
Sound pressure level emissions
(Idle running/ load)
57 dB(A) / 59 dB(A)
* The maximum number of sheets (DIN A4, 70 g/m² or 80 g/m²), fed lengthways, which can be cut in one cycle. The
performance data is determined when the motor is cold and the cutting device is freshly oiled. A weaker mains voltage
or a different mains frequency to the one speci
fi ed could result in less sheet capacity and increased noise during op-
eration. The sheet capacity can vary depending on the structure and properties of the paper and on the way it enters.
The performance data in 80 g/m² is calculated.