HSGM
STYROFOAM-CUTTERS
HSGM GmbH
Telefon: +49 (0) 6123 9978-0
In der Rehbach 13
Telefax: +49 (0) 6123 9978-40
D-65396 Walluf
E-Mail: [email protected]
http://www.hsgm.com
General information
These Operating Instructions belong to this product.
They contain important information about commissioning and operation.
Important information for your safety are specially marked.
Explanation of symbols
To prevent accidents and damage to the device, it is essential to heed these signs.
Please also observe this if passing the product on to others.
For this reason, please keep the Operating Instructions for further reference!
Prescribed use
This device is exclusively for the cutting of polystyrene and hard foam, particularly those type boards used for
facades, roof insulation or cellar insulation.
Safety instructions
Do not operate the product in unfavourable ambient conditions.
Unfavourable ambient conditions are:
Moisture or too high air humidity,
Dust and flammable gases, fumes or solvents,
Strong vibrations.
Always unplug the unit when not used.
When working in rooms, the vapours that arise on the cutting blade during cutting must be removed
directly using an extractor fan. Or only work in well-ventilated rooms.
PVC and PVC-coated materials may not be processed due to the harmful vapours arising during
cutting.
Pay attention to the risk of burns when using the machine!
The cutting blades can reach temperatures of approx. 500° Celsius. Do not touch the cutting blades
once you have switched the machine on. Do not lean the device against objects before the cutting
blade has cooled down completely.
Danger! Danger to life due to electric shock!
A fatal electrical shock can result if water gets into the housing.
Keep the machine away from water.
If water does get in, pull the plug out immediately and do not continue to use the machine.
Warning about dangerous voltage!
Warning about a hot surface!
Warnings and Precautions!
Please read these Operating Instructions carefully and keep them for later use!
