HSGM
Heißschneide-Geräte
u.- Maschinen GmbH
HSGM GmbH
Phone : +49 (0) 6123 9978-0
B-03-VW-D.DOC
In der Rehbach 13
Fax : +49 (0) 6123 9978-40
Status: 28.01.2017
D-65396 Walluf
Email: [email protected]
Printed: 16.05.2018
http://www.hsgm.com
Page: 2
Intended use
The device, in conjunction with an appropriate cutting blade, is suitable for cutting and simultaneously sealing the edges of
cord, ropes, cables, belts and braided sleeves made of fully synthetic fibres such as polyamides, polyacrylonitrile, polyester,
polyethylene etc.
This assumes, however, that the material consists of fully synthetic fibres, w i t h o u t any non-fusible threads in the weft.
The cutting blade is directly electrically heated to approx. 600°C in 6 to 8 seconds by a safety transformer.
Any
thermoplastic material that comes into contact with this cutting blade melts. In the fibre arrangement, the individual warp
and weft threads if close enough have a tendency to flow into each other, thereby forming an uninterrupted, sealed edge.
The edges sealed in this way do not fray, prevent tears and in many cases mean that there is no need for a hem.
Operation under adverse ambient conditions is not permitted.
Adverse ambient conditions are:
Wet conditions or excess humidity;
Dust and flammable gases, vapours or solvents;
Strong vibrations.
Safety information
For safety reasons, the unauthorised modification and/or alteration of the heat cutting machine is not permitted.
The voltage must be supplied using a regular mains socket on the public grid. Attention must be paid to the supply voltage
specified on the type plate.
Ensure that the heat cutting machine is correctly commissioned, paying attention to the Operating Instructions.
The commissioning must be performed by qualified staff in order to ensure the safe operation of this product.
Make sure that the power cord does not come into contact with heat, oil or sharp edges during operation of the machine.
Damaged power cords can cause fires, short circuiting and electric shocks.
Do not expose the heat cutting machine to high temperatures, strong vibrations or moisture.
Machines powered by mains voltage do not belong in the hands of children.
Please exercise special caution when children are present.
Damage caused by a failure to observe these Operating Instructions invalidates the warranty!
We will not assume any liability for consequential damage!
We will not assume any liability for damage to property or for personal injury caused by incorrect
use or failure to observe the safety instructions. All warranty claims will become invalid in these
cases.
