Maintenance should always be carried out by suitably competent persons. If in doubt, contact your
supplier.
OPERATION
The ON/OFF switch is located on the front of the heater at the top.
To turn the heater ON, move the switch to the “I” position. The element should switch on and glow
red.
To turn the heater OFF, move the switch to the “0” position. The element should turn off.
If the heater does not function as expected, disconnect from the power supply and contact your
supplier immediately.
DO NOT OPERATE THE HEATER CONTINUOUSLY FOR MORE THAN EIGHT HOURS,
REGUARLY SWITCH THE HEATER OFF AND ALLOW TO COOL FOR A WHILE
When you have finished with the heater, switch the element off and allow to cool before
disconnecting from the power supply and neatly coiling the power supply cable.
HEATING ELEMENT
If the element fails or becomes damaged, it must be replaced before using the heater. Replacement
elements are available from your supplier.
The heating element fitted to this heater can reach temperatures in excess of 600 degrees.
Before replacing an element, firstly isolate the heater from its power supply and allow sufficient
time to cool down. When handling a new element you must NOT touch the glass with your bare
hands as grease and salts left on the glass surface will shorten the life of the element. Always use the
protective packaging that came with the element or a soft cloth.
Always follow the fitting instructions supplies with the element.
POSITIONING THE HEATER
The heater should be positioned on firm level ground, on a surface that is flame retardant.
Position the heater close to the power supply to eliminate the need for an extension lead
Ensure there is a minimum clearance of 300mm to each side, 500mm to the rear and a minimum
space of 3 meters to the front of the heater to ensure adequate airflow.
Position the heater so that the element faces the area to be heated. DO NOT position the heater
close to flammable liquids or materials.
TO REPOSITION THE HEATER, DISCONNECT FROM THE POWER SUPPLY AND ALLOW TO
COOL
Summary of Contents for ELITE HEAT
Page 1: ......