Spanish, Danish, English)
Exit.
4. Press “MODE ” to confirm the setting, and enter the next setting state.
5. Press “UP” one time, the setting will go ahead for one step; hold the key for
2 seconds, it will run forward by 8 steps/second.
6. Press “DOWN” one time, the setting will backward for one step; hold for 2
seconds, it will run back by 8 steps/second.
7. The system will exit automatically if no key is operated in 30 seconds.
3.3 Alarm set
Press “MODE” to display alarm time,press “UP” or “DOWN” to turn on/off
alarm function
1. Hold “MODE ” key for 2 second to enter into alarm setting
2. There will have 1Hz flashing during setting
3. The sequence of alarm setting: Hour
Minute
Exit
4. Press “MODE” to confirm the setting, and enter the next setting state.
5. Press “UP” one time, the setting will go ahead for one step; hold the keys for
2 seconds, it will run forward by 8 steps/seconds.
6. Press “DOWN” one time, the setting will backward for one step; hold for 2
seconds, it will run back by 8 steps/second.
7. The system will exit automatically if no key is operated in 30 seconds.
8. Enter into alarm setting , the alarm is turn on automatically.
3.4 Snooze set
When the alarm is ringing, click “SNZ” key to pause the alarm and enter 5
minutes of snooze function, And backlight will be on for 10 seconds(when
using adaptor, the backlight will be on all the time), symbol of snooze will be
flashing, Press any other key to exit.
3.5
RCC receiving
1. Entering RCC receiving status:
1)The clock will enter RCC receiving status automatically 10 minutes after
the start-up or reset;
2)Press and hold DOWN button for 2 seconds to enter manual RCC
receiving status;
3)The clock automatically receives RCC signals every day.
2.Time of automatic RCC signal receiving: 2:00 a.m., 3:00 a.m., 4:00 a.m. and
5:00 a.m..
If the reception is successful, it will not enter the receiving again that day.
RCC receiving time is 10 minutes.
3.Display during receiving:
1)When the clock enters RCC receiving status, a tower-shaped symbol on
the LCD will flash.
2)When the clock is receiving the signals, the tower-shaped symbol and a
curved antenna symbol of RCC will flash.
3)After receiving the synchronization signal, RCC symbol fully displays and
