2.2 Rate of Change Icon
The rate of change icon
detects rapid changes in temperature and humidity. If the
arrow points upward, the temperature is increasing at a rate of +2°C per 30 minutes (or
greater), or humidity is increasing at a rate of +5% per 30 minutes (or greater). If the
arrow points downward, the temperature is decreasing at a rate of -2°C per 30 minutes
(or less), or humidity is decreasing at a rate of -5% per 30 minutes (or less).
3. Indoor Thermo-Hygrometer Sensor Operation
Note:
The indoor sensor has three buttons for easy operation:
MIN/MAX/-
button,
SET
button, and
CH/+
button.
3.1 Indoor Sensor Channel Setting
Press and hold the
CH/+
button 3 seconds until the scroll icon
shows. In scroll mode,
press the
CH/+
button to set up the channel number 1 through 8 channel. Press and
hold the
CH/+
button 3 seconds to exit channel setting, scroll icon disappears.
Note:
Set up the channel numbers
BEFORE
inserting the receiver batteries,
3.2 Min/Max Mode
The Min/Max mode displays the minimum and maximum temperature and humidity
(since reset of the unit) for the indoor sensor.
1.
Display Maximum
. Press the
MIN/MAX
button once to display the maximum.
The
MAX
icon will be displayed.
2.
Clear Maximum.
To reset the maximum values to the current values,
press and
hold
the
MIN/MAX
button for 3 seconds.
3.
Display Minimum
. Press the
MIN/MAX
button again to display the minimum.
The
MIN
icon will be displayed.
4.
Clear Minimum.
To reset the minimum values to the current values,
press and
hold
the
MIN/MAX
button for 3 seconds.
To return to normal mode, press the
MIN/MAX
button again.
3.3 Clearing Min/Max Daily
The minimum and maximum can be set to clear daily (at midnight) or manually. Press
and hold the
SET
button for 3 seconds to switch between
and Clears Manually.
When
is selected min/max reading will be cleared every
0:00
from the time you
clear it.
3.4 Temperature Units of Measure
The default temperature units of measure are degrees Celsius. To toggle between
degrees Celsius and degrees Fahrenheit, press and hold the
MIN/MAX
button for 3
seconds in normal mode.
3.5 Backlight Operation
