- 12 -
3.3 Main parts
Socket and LED
Place where the socket is placed:
LED ACTIVE:
Socket not present.
LED BLINK:
Indicates the socket that must be used for the tightening
program.
When the NetBee Socket Tray is switched on, the LEDs are activated in
sequence.
The position of the sensor can be adjusted to suit the sockets used:
To be detected, sockets must be metallic.
Normally the cap is used with a customized hole to match the shape of
the socket (in the figure above the cap is shown as “new”, without any
hole on top):
Sensor
Rotate to adjust
