3 input x 1 output HDMI Video Switch
3
4.0 Controls, Functions, and Indicators
Front Panel
Rear Panel
Input Video Channel Indicator LEDs and Select Button
Press the ‘Select’ button to sequentially select one of the 3 inputs
Signal Boost Button and LED indicator
If you have a cable longer than about 15 feet connected to the output press this
button once to boost the output signal strength. In general leave this in off mode
unless you are observing digital artifacts that indicate signal loss such as
pixilation, freezing, or loss of image.
Input Power indicator
The unit does not have an on-off button. This light comes on as soon as you
plug in the power adapter.
DC Input Power Jack
Plug the included power supply into this jack. The red LED should come on
indicating power is on. NEVER SUBSTITUTE ANY OTHER POWER
SUPPLY AS THIS MAY (and probably will) DESTROY THE UNIT.
HDMI Input and Output Connector
Using a high quality HDMI cable, connect the output (left most connector when
viewed from rear of unit) connector to your display. Connect your inputs
starting with HDMI #1 (right most connector when viewed from rear of unit) –
cables are not supplied - Contact Hall Research Technologies if you need
cables.
5.0 Contacting Hall Research and Shipping/Packaging
Contact HRT Support at 714-641-6607 or via email or web. Before you do,
make a record of the history of the problem. We will be able to provide more
efficient and accurate assistance if you have a complete description. If you need
