Page 26
Huddle Hub One / Huddle Hub One+ Configuration Guide
DHCP server
Tick this checkbox to enable the internal DHCP server of HHO+. This DHCP server automatically
assign the IP address and configure the network parameters of the connected clients.
DHCP range
The DHCP range delimits the available addresses to be automatically assigned to the connected
clients.
Authentication
The available authentication standards for the Wi-Fi clients are WPA and WPA2. The WPA/WPA2
option lets the system negotiate the standard with the client.
SSID broadcasting
Tick this checkbox to enable the broadcasting of the SSID and make it visible to Wi-Fi scanners.
Hiding the SSID is possible, but all the available technical literature explains that this practice is not
recommended.
Client isolation
Tick this checkbox to prevent devices wirelessly connected to HHO+ from reaching each other.
Station mode
When configured in Station mode, HHO+ connects to the company Wi-Fi network (WPA2-PSK) exactly
as any other Wi-Fi client device. Station mode is useful to connect an HHO unit to the company LAN
when no cable is available or, in a dual network configuration, to connect it a secondary company LAN
dedicated to guests.
Connect to a hidden network
By ticking this checkbox, you make HHO+ able to reach a hidden SSID. In this case you have to
manually specify the name of the desired network.
SSID
This is the SSID of the network to connect with. Unless you want to connect to a hidden network (see
above), the connection procedure is the same used for any wireless device:
1. press the
Search AP
button to scan for the available wireless networks;
2. click on the list of found Wi-Fi networks, and select the SSID you want to connect to;