2-Port Component Video Splitter & Switch
3
2.0 Features
•
Dual-purpose unit; can work as a splitter or as a switch
•
Perfect for high quality video
•
Supports all resolutions including 720p and 1080i
•
LED Indicators
•
Compact and Economical
•
Installs in minutes
•
Includes BNC-to-RCA adapters to allow use of either cable
•
Universal Power Supply
3.0 Installation
1.
Your package includes the Splitter/Switch box, a power supply, 9 pieces of
RCA-to-BNC adapters, and this Manual. No cables are included with this
device, if you need to purchase Component cables for inputs and outputs
please contact Hall Research Technologies, Inc.
2.
Prior to applying the power supply to the unit, decide if the application calls
for a Splitter (1 in x 2 out) or a Switch (2 in x 1 out) and set the mode of
operation via the front panel switch. Once power is applied, if the unit is
acting as a splitter both LED’s on the front panel (labeled A and B) will be
on, and when acting as a switch, only one LED (the selected port) will be
lit.
3.
Plug the input and output cables to the unit
4.
Plug the power supply into the unit.
5.
Turn on the monitor(s) and the video source.
4.0 Operation
When the CP-200 is configured as a Splitter, both LED’s on the front panel
(labeled A and B) will be lit and the push-button switches are disabled.
Alternatively, if the unit is acting as a Switch, only on of the LED’s on the front
panel will be lit. Use the push-buttons on the front panel to select the input
channel to be routed to the output. By default, upon power-on reset, channel 1 is
selected.
Note that the unit can also be used for Composite Video signals, which only
require one connection for each port. In this case, we recommend that you use
the Y connector on each port
