Introduction
Thank you for purchasing the Harmonic Resolution Systems M3 Isolation Base.
When used properly, it will give you many years of superior musical or video
signal reproduction.
The M3 Isolation Base significantly reduces the negative impact of structure
borne vibration on your audio or video component performance. Many years of
engineering experience, custom material development, and listening tests are
incorporated into the design of the M3 Isolation Base. The performance of the
M3 Isolation Base will enable your audio/video source and amplification
components to achieve peak performance.
The M3 Isolation Base is a perfect match for HRS Damping Plates and Nimbus
products. While the M3 Isolation Base works to significantly reduce structural-
borne vibration, the HRS Damping Plates and Nimbus products significantly
reduces the harmful effects of air-borne vibration and structural resonance on
your components.
Please read this manual completely prior to use of your M3 Isolation Base for set
up and product care instructions. Proper care of you M3 Isolation Base will
ensure optimum performance and an aesthetically pleasing appearance.
Safety Instructions
IMPORTANT WARNINGS!
Do not place any tall objects on the isolation base. A tall objects is any object
with a height that is greater than the length of the isolation base. A tall object is
also any object that has a height greater than its own width or length. Tall
objects
must not
be placed on top of the isolation base for any reason. The object
may become unstable and tip over causing damage to the component, adjacent
objects, or injury to people.
Lifting or moving the isolation base should always be done by means of the outer
rectangular frame. Do not lift the isolation base by the inner plate or the external
feet attached to the bottom of the rectangular frame.
Always
lift or move the
