Model VHD-2
7
Installation and Setup
1. Plug the power supply to the AC (110 or 220 VAC) line. Plug output of
the supply to the VHD-2.
2. Insert supplied button-type batteries in the remote control unit.
3. Using the supplied VGA input cable; tie the
VGA IN
connector of the
VHD-2 to the PC video card.
4. Optionally, plug a local VGA monitor or LCD at the
VGA OUT
of the
VHD-2.
5. If the TV has an S-Video input connector, connect the
S-VIDEO
connector on the VHD-2 to it, using the S-Video cable
6.
If there is no S-Video connector on the TV monitor, connect the CV
output of VHD-2 to the composite video input on the TV
7.
Set the TV monitor to “video” mode.
8.
For HDTV connection use the Component cable provided
