UHBX-Series
11
6.0 Specifications
Video
Standards
DVI (single link) and HDMI (compliant with HDMI 1.4 video specifications
including 12 bit color depth, 3D video and 4K support)
Signal type
TMDS
Connectors
Locking HDMI
Resolutions
DVI signal
VGA (640x480) thru WUXGA (1920x1200)
HDTV signal 480i through 1080p
Digital Cinema 4K (4096x2160) – Not supported in Long Reach
Audio
Formats
All HDMI Embedded Audio including: LPCM 7.1CH, Dolby TrueHD and
DTS-HD Master Audio (32-192kHz sample rate)
Other Signals
DDC
Pass-Thru DDC for reading EDID directly from remotely connected LCD
and HDCP handshake
CEC
Pass-Thru DDC for Consumer Electronics Control compatible devices
RS232
Bidirectional (full-duplex) any baud rate up to 115,200
IR
Extended in both directions. Carrier modulation range from 30 KHz to 60
KHz
PoH
Power-over-HDBaseT meets IEEE 802.3af standard. PD side identifies as
Class 2 (3.84–6.49 watts). Actual power consumption of PD side is 5.5 watts
max
General
Power Supply 100 VAC to 240 VAC, 50-60 Hz, external; 5 VDC, 3.2 A, regulated
Actual DC current (powering both –PSE and –PD sides) 1.8A max
Power
Sender:
3.5 watts (12 BTU) maximum
Receiver
5.5 watts (19 BTU) maximum
Temp/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, non-condensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, non-condensing
Cooling
Convection
Mounting
End plates have L bracket with hole for surface mounting
Enclosure type Metal (Aluminum ends, Aluminum Extrusion)
Dimensions
1.18" H x 4.13" W x 4.57" D (30mm H x 105mm W x 116mm D)
Depth excludes connectors
Product weight Sender
9.3 oz (0.58 lb or 264 g)
Receiver
10 oz (0.63 lb or 284 g)
Kit (shipping) 37 oz (2.3 lb or 1050 g) includes: sender, receiver, power
supply, power cord, HDMI cable, manual, and packaging
Vibration
ISTA 1A in carton (International Safe Transit Association)
Safety
CE
EMI/EMC
CE, FCC Class A
MTBF
90,000 hours (Calculated Estimate)
Warranty
2 years parts and labor
Specifications are subject to change without notice
