3
To get the best performance of the heater, you can adjust the angle 0° - 45° (fig. 2)
Risk of fire and/or burn: Turn off the device and let it cool down for approx. 15
minutes.
Heating Element
Enclosure
Base
Pull Switch
Heating level indicator
Operation
The heater is switched on by a pull switch. If you can see the figure “0” on the heating
level indicator than the heater is off. The first pull of the pull switch will activate level
1: 500W, a second pull activates level 2: 1000W, and a third pull will activate level
3: 1500W which is the max. power. To turn off the device, keep pulling the switch until
it shows level “0”.
