V i s i t
h t t p s : / / h q t e l e c o m . c o m
f o r l a t e s t d o c u m e n t a t i o n & s u p p o r t
P a g e
6
leading 305 digits for you! Again, this is a “nice to have” convenient feature. It’s not required. You can only setup one local
area code. To set it up, press MENU, then press the ‘UP’ button 2 times to flash “LOCAL AREA CODE”, then press “OK/DIAL”
button to enter into the Area code setting. The LCD display will show 5 dashes: - - - - -. The first dash “-” will flash, then
Press“UP/DOWN” buttons to select the desired number, then press “OK” button to confirm and enter the next number, when
setting finish setting all the numbers, press the “OK” button and will go back to the ‘LOCAL AREA CODE’ interface.
5.4
ENTER TIME/DATE Setting
Please note that the month, day, hour and minute data is automatically updated on your SOS phone with the caller id
information from incoming calls that you receive. Only the year will require manual setting. To set it up, press the ‘MENU’
button, then the ‘UP’ button 3 times to flash ‘ENTER TIME/DATE’, then Press “OK/DIAL” button to confirm. The display will flash
the last 2 digits on the 20“13”, then Press “UP” or “Down” button to modify the current year. When finished, Press ‘OK’ button
to confirm, and then use the same method to set the month, day, hour & minute.
5.5
LANGUAGE Setting
When the LCD shows “LCD LANGUAGE’’, Press the “OK/DIAL” button to enter into the language interface option, and the
default language is “English’’. Press the ‘UP’ or “Down’’ to change to other language. The available languages are: English,
French, Spanish, Italian, Netherland, and German. After the language is chosen, Press the “OK’’ button to confirm and enter
into next step.
5.6
Prompt VOICE Setting
When the LCD shows "VOICE", press the ‘OK/DIAL’ button to enter the prompt VOICE option. The LCD display will show the
current state: "VOICE ON". Press the ‘UP’ or ‘DOWN’ button to select "ON/OFF", then press ‘OK/DIAL’ button to confirm. Select
“ON” to get announcements on incoming phone numbers, menu operation steps, and the pre-dialed numbers.
5.7
FLASH TIME Setting
This is an optional setting. We recommend using the default (1000ms) unless you are using the SOS phone with a PBX or Key
system that requires a different setting for a special feature such as call waiting. Please consult your telephone provider
before changing this setting. When the LCD display show "SET the FLASH TIME", press the ‘OK/DIAL’ button to enter the
‘FLASH TIME’ selection. The LCD display will show the current FLASH time (default: 1000). Press the ‘UP’ or ‘DOWN’ buttons
to select FLASH time: 100ms, 300ms, 600ms, and 1000ms. Press the ‘OK/DIAL’ button to confirm.
5.8
PAIR NEW PEDANT Setting (REQUIRED)
Please follow the steps below to pair a pedant (one at a time) with the base.
(1) Press the ‘MENU’ button
(2) Press the ‘UP’ button 5 times until the LCD flashes "PAIR NEW PENDANT"
(3) Press the ‘OK/DIAL’ button to select. The word “PAIRING” will flash on the LCD Display.
(4) Press the ‘OK/DIAL’ button again, the LCD display will show "PAIRING........".
TIP: Please make sure you press “OK/DIAL” 2 times
